How to Tow A Car with A Dolly: 2020 Ultimate Guide



A car tow dolly is a valuable asset to the owner of the car. There have many reasons for that. Maybe you need a second car to move to a long-distance, maybe you are taking your car along on a trip, maybe for recovering and many other things can be your reason for using a car tow dolly.


Autocarelabs.com has the finest recommendation to find the best car dollies in the market right now. But you need to know how to tow a car with the perfect dolly, and many car owners don’t know how to do it.

Maybe you are one of them, or you are buying a car tow dolly for the first time and want to know how to use it. If it is, then we can say you are in the best place. This article will give you the ultimate guide on how to tow a car with a dolly. Let’s start.


How to tow a car with a dolly:

Source: cartowdolly.com

A car dolly is a tow-wheel trailer used to move a vehicle from one place to another. This thing only lifts the front two wheels of your car. The back two wheels will remain the same; we mean to say one the road when you will use it.
People think that using a car dolly or tow dolly is very easy. But actually, it is not as easy as it seems like. Anyways, now we are going to give you the step by step process. Just follow it to easily do it. These steps are as follows:

1. Park the vehicle and the car dolly in the line

The first thing you have to do in this process is to make sure that the car you want to tow is in the park in the parking brake set. Once you finished parking in the right position, then you have to check the dolly well. Everything should be okay here. That is why you have to double-check the car dolly’s coupler and the safety chain so that it will safely be attached to the vehicle you want to tow.

Read More:  Best 4 Tips How to Upgrade Your Car Interior

2. Prepare your car dolly

Source: bendpak.com

In the second step, you have to prepare your car dolly fully. At first, you have to consider extending the ramps at the car dollie’s rear side. Then you need to free the tire straps securely from the ratchets. After that, you have to place the ramps in a flat position carefully.

This preparation should be taken very carefully because if you make any mistake in this process, especially with the car dolly, severe damage to your car can happen at any time. So, for securing your car, you have to be very careful in this step.

3. Load your car on the dolly

In the third step of this process, you have to load your car on the dolly. The first thing you have to do in this step is positioning your car, which you want to tow behind the dolly. Make anyone is not standing between the car and the dolly when you are loading your vehicle.

Then you have to drive slowly and straightly on the ramp until the tire of your vehicle reaches stops of which is at the front side of your car dolly. You should place your car at the center of the platform. Remember, to make sure the positioning though it is off to the one different side, you have to load it off and then reposition. Once you land your vehicle in the right position, you have to lock the vehicle’s steering wheel on the tow dolly.

Read More:  4 Best Exterior Car Accessories to Buy in 2020

4. Secure your vehicle

Source: getblogo.com

After that, you have to put the straps on the upper side and over the tires for securing your vehicle. Here, you have to make sure that straps are situated at the center over the tire. Then it would help if you kept the ratchet so it can slide to the left or the right side of it. It will help to align the position with the center of the tire.

After that, you have to rout through the slots so that the straps on the ratchet spool can work correctly. You have to make sure that the six inches of straps pass through the slot on the top of the ratchet spool. The tire of your vehicle can be bigger.

In that case, you need to tow your car in the other methods. However, then you have to consider tightening the ratchet and fold the handle down. Then it would help if you fastened the security chain to the frame of the vehicle. After that, you need to put some slack on the chain, loop the chain around, and secure the chin through an open curated link using the respective S hooks.

5. End up the loading process

In the next step, you need to secure the positions of the tow ramps. You can lift them so that it can slide back into the tow dolly. After that, you have to make sure that all the lights must be working. You also need to secure all components for the safety of your vehicle.

Read More:  9‌ ‌Things‌ ‌to‌ ‌Avoid‌ ‌When‌ ‌Buying‌ ‌a‌ ‌Used‌ ‌Car‌ ‌- 2020 Guide

6. Take a test drive

The next thing you have to do is take a careful test drive. This is a very important part of this process. You need to go for a test drive within your preferred nearby location with some left and right turns. You have to recheck all the straps and everything you have done in this process.

So, this was basically the way how to tow a car with a car dolly. This process is for running cars. But you also may need to know how to tow a car which is not running. In that case, we can suggest you check out how to load a non-running car on a tow dolly.

Final thoughts

A car dolly is typically a low-cost car towing option for your vehicle. This thing can be very useful for you many times. But for getting advantages from it, you need to know how to use it. In this article, we tried to teach you this. Here our discussion topic was how to two a car with a car tow.

We have given the easiest way for it to you. We hope after reading this article, you will be able to do it easily. Then again, if you have any further queries, you can ask it in the comment section. We will give you an answer as soon as possible. So, feel free to ask us and let us solve your problem.

Leave a Reply

What is 12 + 9 ?
Please leave these two fields as-is:
IMPORTANT! To be able to proceed, you need to solve the following simple math (so we know that you are a human) :-)